REISHAUER RZP 200

•  
  Reference number 1049-053024

  Manufacture Year 1986

  Operation Hours not applicable

• Vendor

  Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
  James-Watt-Straße 12
  72555 Metzingen

  Germany

  

• Main Category

  Metal working machines

• Category

  Gear Cutting Machines

• Type of Machine

  GEAR FINISHING MACHINERY

• Sort of Machine

  Gear Grinders

• Manufacturer

  REISHAUER

• Technical data

  max. wheel diameter

  0 mm

  gear width

  120 mm

  max. module

  3

  min. module

  1

  total power requirement

  20 kW

  weight of the machine ca.

  7,5 t

  dimensions of the machine ca.

  m

• Description

  5 machines in stock,
  YOM: between 1986 and 1990
  
  Gear Æ, min./max. 55 / 120 mm
  Gear Æ for shaft-formed parts 80 mm
  Module (pitch 25.4 - 8.5) 1 - 3
  No. of teeth, min./max. 13 / 80
  Pressure angle 14 - 30 °
  Helix angle, max. 40 °
  Workpiece clamping length 145 - 420 mm
  
  Grinding worm Æ 300 - 400 mm
  Grinding worm width 25 - 40 mm
  Grinding worm speeds, infinitely variable (35 m/s) 1,650 rpm
  Feed range 0.4 - 4 mm/rev
  
  Total electrical load 20 kW - 380 V - 50 Hz
  Weight 7,500 kg
  
  Accessories / Special Features
  * REISHAUER Electronic Control = Easy programming of workpiece
  parameters and grinding process.
  * Automatic workpiece handling system for shaft-formed parts,
  approx. 350 mm long, including hydraulic loading and unloading
  device. Fully automatic production is possible.
  * Profile correction is possible for height and width crowning.
  * Separate hydraulic unit. * Separate switch cabinet.
  * Fully automatic profiling with a swivable diamond gear mounted
  on a shaft corresponding to the workpiece. Dressing intervals
  can be preset, with compensation.
  
  Price, ex stock, each DM 245,000.--
  
  These machines are very suitable for grinding tooth flanks on large
  series of helical gears, with or without profile modification at a
  minimum cost. Separate electronically controlled drive of grinding
  worm and workpiece results in high precision and good surface quality
  of gears. Constant speed is controlled by an angular decoder.
  Grinding infeed is possible for the full profile depth as well as by
  a preset additional forwards and backwards movement of workpiece.
  Both flanks are continuously meshed and ground. Profile corrections
  during dressing process are made by the same method (by a diamond
  gear corresponding to the workpiece). All functions are controlled by a
  microprocessor. Code numbers for various errors are displayed.
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• Machine accessories

  
  
  
  
  
  
  

• State

  Used