PFU 2010 PX portal milling machine

•  
  Operation Hours not applicable

• Vendor

  BZT Maschinenbau GmbH
  Westring 18
  33818 Leopoldshöhe

  Germany

  

• Main Category

  Woodworking machines

• Category

  Milling machines

• Manufacturer

  BZT-CNC

• Control

  BZT-Steuerung U-ST63.1

• Description

  Milling Machine BZT PFU 2010 PX
  With the series PFU , we demonstrate the proverbial stability of our machines again impressively demonstrated . The machines of the PFU - series
  have been specifically designed for maximum stability and accuracy, and extremely precisely. Your steel construction and the used
  Roller bearings Bosch form an extremely stable foundation for all areas of application. With a direct drive means stronger
  Stepper motors prevents the transfer of engine vibration effectively to the ball screw. The built-in ball screws in all
  Axes provide excellent milling results !
  
  - Ballscrews in all axes
  - Linear guideways and carriages from Bosch
  - Available with stepper motor or AC servomotor
  - Driven nut in the Y- axis
  - Concealed side guides protect sensitive components from contamination
  - Side parts in stable carbon construction
  Specifications
  
  BZT PFU 2010 PX, without a table, including frame Travels: approx X = 1020 mm Y = 2010 mm Z = 135 mm
  
  - BZT CNC portal milling machine PFU 2010 PX
  - Clamping surface: approx X = 1000 mm x Y = 2000 mm
  - Passage height under Z -axis: 150 mm
  - Ballscrews in all axes
  - Management system from Bosch -Rexroth , X - and Z- axis 15 mm , Y-axis 25 mm
  - X-axis: 100 x 100 mm aluminum substrate
  - X-axis: ball screw 16 x 10 mm
  - Y -axis: Ball screw 16 x 16 mm with driven nut
  - Y -axis: C section steel with 1 x 140 x 15 + 2 x 100 x 15 mm
  - Z- axis : 135 mm way for HF spindles suitable to 2.2 KW
  - Low vibration , welded machine frame made ​​of steel
  - Dimensions : approx 2300 x 1600 x 1600 mm
  - Machine Manual
  
  PFU 2010 aluminum T-slot 15mm
  
  - 4 piece , hollow section profile , 2300 * 250 * 15mm
  
  BZT - control U - ST63.1 3-axis 6.0 Amp 48 Volt , 6.7 Amp Switching output 2 * 220Volt
  
  - Including BZT CNC Software V.5 for Windows , 230 volt power cord , and USB cable
  - For operation you need a PC or notebook , recommended Mindeausstattung : WIN 7 / XP , CPU Dual Core 2.2GHz , 1GB RAM, VGA graphics card with Open GL , Ethernet, USB 2.0

• Machine accessories

  - Portal Milling Machine BZT PFU 2010 PX
  - PFU 2010 aluminum T-slot 15mm
  - BZT-control U-ST63.1

• State

  Used